Produse pentru 10 tone etaj jack (19)

Floor and Ceiling Bracket Nr. 10

Stahlstützen (galvanisch verzinkt) höhenverstellbar und arretierbar. Geignet für die Aufnahme und Verschraubung von C-Profilen. Verschraubung von unten mit dem Stützkopf möglich.

Dachneigungsausgleich bis 15°. Der Träger in verschweißter Ausführung. Ständer aus verzinktem Stahl und Stange aus massivem Aluminium, Ø 16 auf Ø 10. Geeignet für Windlaststufe: I- IV Transportlänge: 2,0 m Anzahl und Art der erforderlichen Betonsockel: 3x 8,5 kg Die Betonsockel sind nicht Bestandteils des Produktes.

Höhenverstellbarer Hohlbodentank 8902H, 2-fach bestückt. Die Aufnahmebox besteht aus sendzimirverzinktem Stahlblech. Rahmen und Deckel aus Edelstahl. Deckel schließt auch bei gesteckten Standardsteckern in gerader oder abgewinkelter Form. Der herausnehmbare Klappdeckel kann mit 15 mm Stein, Holz etc. belegt werden. Durch den Unterbaurahmen ist diese Bodensteckdose ideal für Hohlböden! Weitere Bestückungsvarianten auf Anfrage. Equipment:Schuko, RJ45 double Design:square Ground:Raised floor, Screed Protection:IP20 Material:Aluminum, Stainless steel Color:Stainless steel Surface:sanded

Taktile Flächensensoren bieten optimalen Schutz zur Bereichsabsicherung.

GASS vérin de pied et de tête - Systèmes d'étaiements

This unwinder is characterised by its solid construction. The range of application extents from winding good processing on bulding sites to cable installations in storage and dispatch areas. Solid axle holders can be adjusted and locked in a height suitable for the workable drum dimension. drum diameter:710 - 1000 mm drum axle incl. cones:Ø 34 x 840 mm drum weight:max. 1000 kg length:500 mm width:240 mm height adjustable:420 - 600 mm colour:RAL 7005, mouse grey weight (incl. axle and cones):approx. 32 kg / pair accessory:exclusive drum (sample)

(certificated according to DIN EN 12825) The substructure for the raised floor is usually made of M20 pedestals. So you can construct hights of several meters as it is needed by your personal demand. With the usage of special headparts you can fix c-profiles. All of our pedestals are made of galvanized steel and yellow passivated. Due to that the product have a very good durability. Delivery of special sizes are possible on request! Individual sizes could be delivered from our production in Bremen.

Die Fasspumpe B2 Battery ist geeignet für dünnflüssige, wässrige bis leicht viskose Medien. Das Set ist zur Entnahme von Kleinbinden wie z. b. Kanister oder Hobbocks geeignet. Die Pumpe ist jederzeit flexibel und schont damit wichtige Ressourcen. Das Set wird ohne Akku und Ladegerät geliefert. *optionale Föderradform als Laufrad oder Rotor * Akkulaufzeit 35 min bei maximaler Drehzahl * 1 Akkuladung entleert ca. 12 x 200 Literbehälter Eigenschaften & Vorteile * austauschbarer, leistungsstarker Akku mit Li-Ionen * BLDC Motor mit hohem Wirkungsgrad bis zu 70% * stufenlos regelbar * hohe Akkulaufzeit * automatische Abschaltung bei Überlastung * ausgereifter Schnellverschluss * Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C.

The round base plate (Ø 400 mm) of this stainless steel anchorage point (Ø 16 mm) guarantees that any force exerted on it is optimally distributed across a thin installation surface. Our standard package includes 24 stainless screws which are used to attach the device to an OSB / wooden surface. EN 795:2012, A + CEN/TS 16415:2013 OSB min. 12 mm Wood min. 18 mm Can also be installed on a vapour barrier or waterproofing (max. 15 mm) Optimal force distribution through the round base plate design Incl. installation set

  Rammschutzbügel abnehmbar, Ø 76 mm, 400 mm - 1000 mm Breite, zum Aufdübeln Material: Stahlrohr, Ø 76 mm Gesamtbreite: 400, 750 oder 1000 mm - bitte wählen Höhe: Überflur 650 oder 1150 mm Artikelnummer: 477_09APBG

This easy to use device measures the hardness, stability and elasticity of the sports surfaces. These values are also referred to as shock absorption, vertical deformation and energy restitution. A special sensor registers the values which are simply shown on the display. The values are directly related to injury sensitiveness and playing experience. Stores up to 50 drops. The result of these drops can be exported GPS location mode with time and position of the actual test Export data mode for external processing such as statistics and raw data analyzing Databank export options in combination with official partners of SMG. Including hard plastic case with handle and transport wheels Weight: 10kg, Dimensions: 930 x 270 x 240 mm Art.-No. 6400268

Floor and Ceiling Bracket Nr. 10 a

Floor box 8808A with a square housing made of stainless steel and anodised natural aluminum lid. Inside there are two aluminum device carriers for 4 units each, alternatively other combinations are also possible. It can be installed at any point in the floor, as pipes are used to feed the cables. Lid also closes when the plugs are inserted. Due to the low installation height, this version is particularly suitable for floors in old buildings. Further equipment variants on request. Equipment:Schuko, RJ45 double Design:square Ground:Screed Protection:IP20 Material:Aluminum, Stainless steel Color:Stainless steel Surface:sanded

The housing, the lid and the frame of the floor box 2008B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 8 installation devices. The sockets are VDE certified. Further equipment variants on request. Equipment:Schuko, RJ45 double Design:square Ground:Screed Protection:IP65 Material:Aluminum, Stainless steel Color:Stainless steel Surface:sanded

Floor socket 8802B made of aluminum with lid for laying on. The rimless lid can be covered with floor coverings and closes in straight or angled form even when standard plugs are inserted. Further equipment variants on request. Equipment:Schuko, RJ45 double Design:square Ground:Screed Protection:IP65 Material:Aluminum Color:Aluminum Surface:anodized

Height-adjustable floor box 8902B with 2 slots. The housing, frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request. Equipment:Schuko, RJ45 double Design:square Ground:Screed Protection:IP20 Material:Aluminum, Stainless steel Color:Stainless steel Surface:sanded

Floor box 8808B made of stainless steel. Inside there are two aluminum equipment racks for 4 units each. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The rimless lid also closes when the plugs are inserted and is designed for sticking on floor coverings. Further equipment variants on request. Equipment:Schuko, RJ45 double Design:square Ground:Screed Protection:IP20 Material:Aluminum, Stainless steel Color:Stainless steel Surface:sanded

(certificated according to DIN EN 12825) We offer pedestals for access floors alternately as pipepedestals in M16 or M20. So it is possible to construct heights of several meters, as it is needed by your personal demand. All of our pedestals are made of galvanized steel and yellow passivated. Due to that the product have a very good durability. Delivery of special sizes are possible on request! Individual sizes could be delivered from our production in Bremen.